6肖中特网站|最准的特马网站白小姐|
home About us Latest news Product Company honor equipment Case knowledge Contact us Management 中文版本
 
Product
          Shaking Table
          Sand Processing Equipment
          Vibrating Screen
          Magnetic Separator
          Jigger
          Feeder
          Other Mineral Processing Equip
          Magnetic Separation Equipment
          Flotation Equipment
          Grading Equipment
          Ball Mill
          Crushing Equipment
Client case
Do not add information
 
    Your present position:Product display >> Jigger >> Product information
Product name:
Diaphragm Jigger 
Product ID:
042
Product price:
Negotible/Set
specifications:
various kinds
Product notes:
  Detailed product description:

Jigger , jigging machine belongs to gravity-based equipments, which can separate mineral based on differing of specific

gravity. saw-tooth wave jig is mainly consist of three parts: main frame, driving set and jigging chamber.

Application

Jigging machine is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium,antimony, lead, tantalum, niobium and other minerals.

 Diaphragm Jig description

   Rectangle Compartment Side Way Action Type Jig has two types. One is left compartment side way jig, another is right compartment side way jig. The jig has fixed screen. It is available in separating metallic ores, such as tungsten and gold placer deposits as well as beneficiated tin ore, which not only can be separated fine materials, but coarse also. The largest feed size is 6-8mm but it can be 12mm in few cases.

Rectangle Compartment Side Way Action Type Jig is mainly composed of jig box, drive device, water distribution, diaphragm and bibcock. There are two jig buckets with different sizes and each diaphragm is divided into jig area and diaphragm area by clapboard. The rubber diaphragm pumping to make medium (water) moving is the jigging course. The triangle belt drives big belt pulley by electromotor so connecting rod of the eccentric gear and rocker are up and down moving. Another connecting rod is connected with the rubber diaphragm which is moving up and down to jig.

Based on the size of ore, we can change the stroke of connecting rod and choose different stroke to make the best jigging effect. The method of altering stroke per minute is to exchange a smaller belt pulley but there are two strokes per minute: 322r/m; 420r/m. The method of choosing stroke is to loose bolt and screw cap, take out bowl and move the relative place between eccentric adjusting sieve and eccentric shaft so there are 11 different strokes (0-25.3mm).

Because of a sieve added on the working screen, the jig can be processed the uneven sizes of material. (note: The sieve can be requested to supply or not). After the feed ores are sent to jig chamber, the ores are separated to different layers in the medium by the pulsation of diaphragm. The light but weight is sank to the tank of jig bucket through the spaces of materials of artificial bed layer and its sieve holes but the coarse but light is washed to the discharge end of screen by medium. Because the back jig chamber is lower 50mm than front jig chamber, the light ores is overflowed through front jig chamber to the back chamber and jigged again. If needed, the place of end plate can be adjusted to control the discharge amount. The concentrate in tank can be discharged by discharge tube regularly.

model

Feed size (mm)

capacity

(t/h)

Jip frequency (times/min)

Medium-range adjustment range (mm)

Feed concentration (%)

motor

Supplement water

(1/h)

Dinensions (L×M×H)

Weight

(kg)

type

power (kw)

Double-bucket

300×450

1-12

2.1-6.1

322-420

0-25.3

15-50

Y90S.4

1.1

2.1-3.8

1290×1270×1750

745

300×450A

1-12

2.1-6.1

322-420

0-25.3

15-50

Y90S-4

1.1

2.1-3.8

1320×1270×1740

550

Single-bucket

300×450

10

2-5

300

0-18

15-50

Y901.6

1.1

1-2

650×1030×1588

320

400×600A

10

2-5

300

0-18

15-50

Y901.6

1.1

2.1-5.4

792×1237×1894

400

400×600

10

2-5

76.7-767

0-18

15-50

TZT222.4

1.5

2.1-5.4

996×1263×1789

500


copyright©:2007-2008 Copyright Kunming Hengxing mineral processing equipment manufacturing company
Sales hotline:13888518686(Wen Gong)
Address: Kunming City Fuk Road, century city gate opposite the village after 187
Technical support: Kunming Yi Rui information technology limited company

6肖中特网站
时时人工计划软件下载 飞艇6码稳定公式 keno技巧 平推也稳赚的倍投 云南时时票站 四肖博八码网址 重庆时时三星组选走势图 360重庆老时时走势图 分分彩怎么压稳赚不亏 后一计划软件下载